. update

Dev/sw_fw_scan_CSV/results/aruba_firmware_versions_2026-02-06_13-41-56.csv

@@ -0,0 +1,17 @@
+switch_name,ip_address,firmware_version
+NET-SW01,10.220.1.84,PL.10.16.1006
+NET-SW02,10.220.1.85,PL.10.16.1006
+NET-SW01,10.220.1.84,PL.10.16.1006
+NET-SW02,10.220.1.85,PL.10.16.1006
+NET-SW04,10.220.1.86,PL.10.16.1006
+NET-SW05,10.220.1.87,PL.10.16.1006
+NET-SW06,10.220.1.88,PL.10.16.1006
+NET-SW01-CORE,10.220.1.89,LL.10.16.1006
+NET-SW07,10.220.1.90,PL.10.16.1006
+NET-SW08,10.220.1.91,PL.10.16.1006
+NET-SW09,10.220.1.92,PL.10.16.1006
+NET-SW10,10.220.1.93,PL.10.16.1006
+NET-SW11,10.220.1.94,PL.10.16.1006
+NET-SW13,10.220.1.96,PL.10.16.1006
+NET-SW16,10.220.1.98,PL.10.16.1006
+N/A,10.220.1.99,Auth Failed

Dev/sw_fw_scan_CSV/results/aruba_firmware_versions_2026-02-06_14-17-55.csv

@@ -0,0 +1,17 @@
+switch_name,ip_address,firmware_version
+NET-SW01,10.220.1.84,PL.10.16.1006
+NET-SW02,10.220.1.85,PL.10.16.1006
+NET-SW01,10.220.1.84,PL.10.16.1006
+NET-SW02,10.220.1.85,PL.10.16.1006
+NET-SW04,10.220.1.86,PL.10.16.1006
+NET-SW05,10.220.1.87,PL.10.16.1006
+NET-SW06,10.220.1.88,PL.10.16.1006
+NET-SW01-CORE,10.220.1.89,LL.10.16.1006
+NET-SW07,10.220.1.90,PL.10.16.1006
+NET-SW08,10.220.1.91,PL.10.16.1006
+NET-SW09,10.220.1.92,PL.10.16.1006
+NET-SW10,10.220.1.93,PL.10.16.1006
+NET-SW11,10.220.1.94,PL.10.16.1006
+NET-SW13,10.220.1.96,PL.10.16.1006
+NET-SW16,10.220.1.98,PL.10.16.1006
+N/A,10.220.1.99,Auth Failed

Dev/sw_ip_scann_CSV/config.json

@@ -1,19 +1,20 @@
 {
-  "network": {
-    "subnet": "10.101.0.0/24",
-    "auto_detect": false
-  },
-  "scanning": {
-    "ping_timeout": 0.3,
-    "ping_delay": 0.001,
-    "max_threads": 10
-  },
-  "database": {
-    "devices_file": "known_devices.json"
-  },
-  "logging": {
-    "enabled": true,
-    "log_file": "network_scanner.log",
-    "log_level": "INFO"
-  }
-}
+  "switch_ips": [
+    "10.220.1.84",
+    "10.220.1.85",
+    "10.220.1.86",
+    "10.220.1.87",
+    "10.220.1.88",
+    "10.220.1.89",
+    "10.220.1.90",
+    "10.220.1.91",
+    "10.220.1.92",
+    "10.220.1.93",
+    "10.220.1.94",
+    "10.220.1.96",
+    "10.220.1.98",
+    "10.220.1.99"
+  ],
+  "username": "svc.operator",
+  "password": "NuAaGTNPQWyeneQLI5qr"
+}

Dev/sw_ip_scann_CSV/get_aruba_clients.py

@@ -101,7 +101,7 @@ if __name__ == "__main__":
     
 
     
-    PASSWORD = os.getenv('ARUBA_PASSWORD')
+    PASSWORD = os.getenv('ARUBA_PASSWORD', 'NuAaGTNPQWyeneQLI5qr')
     if not PASSWORD:
         print("Hiba: Az ARUBA_PASSWORD környezeti változó nincs beállítva.")
         exit()

Scripts/python/access_token.py

@@ -0,0 +1,13 @@
+import webbrowser
+from msal import ConfidentialClientApplication, PublicClientApplication
+
+client_secret = 'Rk-8Q~nJ.sZ-xUiNxtEDdzVgoFFosODLVHX~jdrh'
+app_id = '3a08b279-1fc3-419f-a77e-31f12a0f65f7'
+SCOPES = ['Mail.ReadWrite']
+
+client = ConfidentialClientApplication(client_id=app_id, client_credential=client_secret)
+authorization_url = client.get_authorization_request_url(SCOPES)
+print(authorization_url)
+# webbrowser.open(authorization_url)
+
+

Scripts/python/atttachment.py

@@ -0,0 +1,58 @@
+import os
+import requests
+from ms_graph import generate_access_token
+
+def download_email_attachments(message_id, headers, save_folder=os.getcwd()):
+    try:
+        response = requests.get(
+            GRAPH_API_ENDPOINT + '/me/messages/{0}/attachments'.format(message_id),
+            headers=headers
+        )
+
+        attachment_items = response.json()['value']
+        for attachment in attachment_items:
+            file_name = attachment['name']
+            attachment_id = attachment['id']
+            attachment_content = requests.get(
+                GRAPH_API_ENDPOINT + '/me/messages/{0}/attachments/{1}/$value'.format(message_id, attachment_id)
+            )
+            print('Saving file {0}...'.format(file_name))
+            with open(os.path.join(save_folder, file_name), 'wb') as _f:
+                _f.write(attachment_content.content)
+        return True
+    except Exception as e:
+        print(e)
+        return False
+
+# Step 1. Get the access token
+APP_ID = '<app id>'
+SCOPES = ['Mail.ReadWrite']
+GRAPH_API_ENDPOINT = 'https://graph.microsoft.com/v1.0'
+
+access_token = generate_access_token(app_id=APP_ID, scopes=SCOPES)
+headers = {
+    'Authorization': 'Bearer ' + access_token['access_token']
+}
+
+# Step 2. Retrieve emails
+params = {
+    'top': 3, # max is 1000 messages per request
+    'select': 'subject,hasAttachments',
+    'filter': 'hasAttachments eq true',
+    'count': 'true'
+}
+
+response = requests.get(GRAPH_API_ENDPOINT + '/me/mailFolders/inbox/messages', headers=headers, params=params)
+if response.status_code != 200:
+    raise Exception(response.json())
+
+response_json = response.json()
+response_json.keys()
+
+response_json['@odata.count']
+
+emails = response_json['value']
+for email in emails:
+    if email['hasAttachments']:
+        email_id = email['id']
+        download_email_attachments(email_id, headers, r'C:\Tools\')

Scripts/python/import_pfd_de_v.0.2.2-test.py

@@ -0,0 +1,93 @@
+import imaplib
+import email
+import os
+from email.header import decode_header
+
+# ===== Einstellungen =====
+IMAP_SERVER = "outlook.office365.com"   # IMAP-Server-Adresse
+IMAP_PORT = 993                         # IMAP-SSL-Port
+USERNAME = "i.meszely@aps-hh.de"            # Benutzername / E-Mail-Adresse
+PASSWORD = "virgI6774#Maci"                   # Passwort
+# MAILBOX = 'HelpDesk/Inbox'     # Der zu verwendende Ordner
+MAILBOX = "INBOX"                       # Ordnername (z. B. "INBOX" oder "HelpDesk")
+PROCESSED_FOLDER = "erledigt"             # Zielordner für verarbeitete E-Mails
+DOWNLOAD_DIR = r"C:/Tools/"          # Speicherort für PDFs
+
+# Verbindung herstellen
+mail = imaplib.IMAP4_SSL(IMAP_SERVER, IMAP_PORT)
+mail.login(USERNAME, PASSWORD)
+
+# Ordner auswählen
+mail.select(MAILBOX)
+
+# Alle Nachrichten suchen (hier: alle E-Mails)
+status, messages = mail.search(None, "ALL")
+if status != "OK":
+    print("Fehler beim Abrufen der Nachrichtenliste")
+    mail.logout()
+    exit()
+
+# Liste für zu löschende Nachrichten
+delete_list = []
+
+# Nachrichten verarbeiten
+for num in messages[0].split():
+    try:
+        # Nachricht abrufen
+        status, data = mail.fetch(num, "(RFC822)")
+        if status != "OK":
+            print(f"Fehler beim Herunterladen der Nachricht {num}")
+            continue
+
+        msg = email.message_from_bytes(data[0][1])
+        pdf_found = False
+
+        # Betreff dekodieren
+        subject, encoding = decode_header(msg["Subject"])[0]
+        if isinstance(subject, bytes):
+            subject = subject.decode(encoding if encoding else "utf-8", errors="replace")
+
+        print(f"Verarbeite E-Mail: {subject}")
+
+        # Anhänge prüfen
+        for part in msg.walk():
+            if part.get_content_maintype() == "multipart":
+                continue
+            if part.get("Content-Disposition") is None:
+                continue
+
+            filename = part.get_filename()
+            if filename:
+                decoded_name, enc = decode_header(filename)[0]
+                if isinstance(decoded_name, bytes):
+                    decoded_name = decoded_name.decode(enc if enc else "utf-8", errors="replace")
+
+                # Ungültige Zeichen im Dateinamen ersetzen
+                safe_filename = "".join(c if c.isalnum() or c in (" ", ".", "_", "-") else "_" for c in decoded_name)
+
+                if safe_filename.lower().endswith(".pdf"):
+                    filepath = os.path.join(DOWNLOAD_DIR, safe_filename)
+                    with open(filepath, "wb") as f:
+                        f.write(part.get_payload(decode=True))
+                    print(f"PDF gespeichert: {filepath}")
+                    pdf_found = True
+
+        # Falls PDF gefunden → in Zielordner verschieben & später löschen
+        if pdf_found:
+            result = mail.copy(num, PROCESSED_FOLDER)
+            if result[0] == "OK":
+                delete_list.append(num)
+            else:
+                print(f"Fehler beim Verschieben der Nachricht {num}")
+
+    except Exception as e:
+        print(f"Fehler beim Verarbeiten der Nachricht {num}: {e}")
+
+# Nach der Verarbeitung: löschen
+for num in delete_list:
+    mail.store(num, "+FLAGS", "\\Deleted")
+mail.expunge()
+
+# Verbindung trennen
+mail.logout()
+print("Fertig! Alle neuen PDFs wurden heruntergeladen und verarbeitet.")

Scripts/python/ms_graph.py

@@ -0,0 +1,44 @@
+import webbrowser
+from datetime import datetime
+import json
+import os
+import msal
+
+GRAPH_API_ENDPOINT = 'https://graph.microsoft.com/v1.0'
+
+def generate_access_token(app_id, scopes):
+    # Save Session Token as a token file
+    access_token_cache = msal.SerializableTokenCache()
+
+    # read the token file
+    if os.path.exists('ms_graph_api_token.json'):
+        access_token_cache.deserialize(open("ms_graph_api_token.json", "r").read())
+        token_detail = json.load(open('ms_graph_api_token.json',))
+        token_detail_key = list(token_detail['AccessToken'].keys())[0]
+        token_expiration = datetime.fromtimestamp(int(token_detail['AccessToken'][token_detail_key]['expires_on']))
+        if datetime.now() > token_expiration:
+            os.remove('ms_graph_api_token.json')
+            access_token_cache = msal.SerializableTokenCache()
+
+    # assign a SerializableTokenCache object to the client instance
+    client = msal.PublicClientApplication(client_id=app_id, token_cache=access_token_cache)
+
+    accounts = client.get_accounts()
+    if accounts:
+        # load the session
+        token_response = client.acquire_token_silent(scopes, accounts[0])
+    else:
+        # authetnicate your accoutn as usual
+        flow = client.initiate_device_flow(scopes=scopes)
+        print('user_code: ' + flow['user_code'])
+        webbrowser.open('https://microsoft.com/devicelogin')
+        token_response = client.acquire_token_by_device_flow(flow)
+
+    with open('ms_graph_api_token.json', 'w') as _f:
+        _f.write(access_token_cache.serialize())
+
+    return token_response
+
+if __name__ == '__main__':
+    ...
+

Scripts/python/o365_mail.py

@@ -1,21 +0,0 @@
-# Code snippets are only available for the latest version. Current version is 1.x
-# pip install msgraph-sdk
-# New-ItemProperty -Path "HKLM:\SYSTEM\CurrentControlSet\Control\FileSystem" -Name "LongPathsEnabled" -Value 1 -PropertyType DWORD -Force
-from msgraph import GraphServiceClient
-# To initialize your graph_client, see https://learn.microsoft.com/en-us/graph/sdks/create-client?from=snippets&tabs=python
-
-scopes = ['User.Read']
-
-# Multi-tenant apps can use "common",
-# single-tenant apps must use the tenant ID from the Azure portal
-tenant_id = 'caee3499-03f8-4175-9fa8-a935248d0ece'
-
-# Values from app registration
-client_id = '3a08b279-1fc3-419f-a77e-31f12a0f65f7'
-
-# azure.identity
-credential = DeviceCodeCredential(
-    tenant_id=tenant_id,
-    client_id=client_id)
-
-graph_client = GraphServiceClient(credential, scopes)

Scripts/python/test_o365_imap.py

@@ -0,0 +1,40 @@
+import imaplib
+import os
+import ssl
+
+IMAP_SERVER = "outlook.office365.com"
+IMAP_PORT = 993
+O365_IMAP_USERNAME="i.meszely@aps-hh.de"
+O365_IMAP_PASSWORD="virgI6774#"
+
+def test_imap_connection(username, password):
+    try:
+        # Create a default SSL context
+        ssl_context = ssl.create_default_context()
+        # Connect to the IMAP server over SSL
+        print(f"Connecting to IMAP server: {IMAP_SERVER}:{IMAP_PORT}...")
+        with imaplib.IMAP4_SSL(IMAP_SERVER, IMAP_PORT, ssl_context=ssl_context) as mail:
+            print("Connection established. Attempting to log in...")
+            mail.login(username, password)
+            print(f"Successfully logged in as {username}.")
+            mail.logout()
+            print("Logged out.")
+            return True
+    except imaplib.IMAP4.error as e:
+        print(f"IMAP login failed for {username}: {e}")
+        return False
+    except Exception as e:
+        print(f"An unexpected error occurred: {e}")
+        return False
+
+if __name__ == "__main__":
+    # WARNING: Hardcoding credentials is not recommended for security reasons.
+    # Consider using environment variables or a secure configuration method.
+    username = O365_IMAP_USERNAME
+    password = O365_IMAP_PASSWORD
+
+    print(f"Testing IMAP connection for user: {username}")
+    if test_imap_connection(username, password):
+        print("\nIMAP connection test completed successfully!")
+    else:
+        print("\nIMAP connection test failed.")